Home / Products / Electric Handcycle Attachment

Custom Wheelchair Electric Bike Attachment Factory

Product Categories

Recent Posts

China Power Trike Wheelchair Attachment Manufacturers

Electric Handcycle Attachment is a portable power drive device specially designed for ordinary manual wheelchairs and standard electric wheelchairs. Made of lightweight high-strength alloy material and equipped with a silent brushless motor, it features quick installation & disassembly, easy control, stable battery life, reliable load-bearing capacity, and strong passability. It can be quickly connected to various standard wheelchair frames without modification or replacement of the whole chair, ready to use immediately, greatly improving wheelchair mobility and travel range. Suitable for home daily use, community travel, hospital rehabilitation, outdoor short trips, park walking, flat roads and slightly complex road conditions. Designed for the elderly, people with lower limb mobility difficulties, rehabilitation patients and persons with disabilities, making independent travel more labor-saving, safer and freer.

Compaw’s Story
SUZHOU COMPAW INTELLIGENT TECHNOLOGY CO., LTD.

COMPAW is a comprehensive high-tech enterprise integrating R&D, production, and global trade of intelligent rehabilitation aids, accessible mobility devices, and smart home equipment. We are China Wheelchair Electric Bike Attachment Manufacturers and Custom Power Trike Wheelchair Attachment Factory.

With a manufacturing core built on 25 years of mature experience, we operate a 50,000㎡ modern factory, employ over 300 professionals, and maintain a 100‑ton production capacity. Over 70% of our products are exported worldwide, and our annual turnover exceeds 100 million RMB.

Centered on technological innovation, we offer a full‑range product matrix: SlimTough, NeoPath, Zepath, ProPath, and OmniPath wheelchair power assist heads; wheelchair stair‑climbing robots; automatic cooking robots; and multi‑functional wheelchairs.

We deliver one‑stop accessible mobility and smart home solutions to global customers, committed to enhancing the quality of life and work for people with reduced mobility, families, and commercial scenarios through intelligent technology.

Certificate Of Honor
  • Certification
  • Certification
News
Message Feedback
Electric Handcycle Attachment Industry knowledge

SUZHOU COMPAW INTELLIGENT TECHNOLOGY CO., LTD. manufactures front-mounted Wheelchair Electric Bike Attachment drive heads that turn a standard manual wheelchair into a powered handcycle — without replacing the chair. We produce the complete unit in house: alloy frame, brushless motor, lithium battery pack, sine-wave controller, braking assembly and instrument cluster. With 25 years of mobility manufacturing experience, a 50,000㎡ factory in Wujiang, Suzhou, more than 300 employees and a 100-ton production capacity, COMPAW supplies hospitals, rehabilitation distributors, elderly-care operators and channel customers across export markets that take over 70% of our output.

Our drive heads are engineered for a single purpose: attach to the wheelchair the user already owns, carry them further over the ground they actually travel, and come off again in seconds when the chair needs to go in a car boot or an aircraft hold.

Our Wheelchair Electric Bike Attachment Range

Five platform families cover the distance between a short shopping trip and a gravel trail. Each shares the same quick-connect mounting logic, so a distributor can stock one range and serve several user profiles.

SlimTough — portable class. 350W brushless motor, 36V lithium pack in 6Ah / 8Ah / 10Ah, 40–60 km range, 6.5×2c solid rubber tire, 120 mm disc plus hydraulic brake, 10 kg net weight. One-hand, tool-free fit for elders and users who lift the unit daily.
NeoPath — all-round class. 12-inch 350W brushless gearless motor, 48V 8Ah lithium, 45 km ±5 km, 12-inch pneumatic tire, 2-in-1 cable-controlled disc brake, 13.7 kg. Balanced range, comfort and compatibility for home, community and park use.
Zepath — comfort class. Tuned for ride quality and steady control where daily distances are longer and surface quality varies.
ProPath — professional class. Built for rehabilitation institutions, rental fleets and channel programmes that need heavier duty cycles and fleet-level serviceability.
OmniPath — off-road class. 800W 20-inch brushless geared motor, 48V 8Ah / 15Ah / 20Ah lithium, 35 / 55 / 65 km, 20×4.0 inflatable tires, 160 mm hydraulic dual disc brake, TFT instrument with fault-code display, 45 km/h, 20 kg.

Matching the Drive Head to the Application

Model Drive and battery Rated range Terrain and typical use
SlimTough 350W / 36V, 6–10Ah 40–60 km Indoor, community pavements, shopping, hospital corridors; lightweight daily travel
NeoPath 12-inch 350W / 48V 8Ah 45 km ±5 km Home, park, short suburban trips, flat and slightly rough roads
Zepath Comfort-tuned drive Extended daily use Longer daily routes, mixed pavement quality, comfort-first users
ProPath Professional duty drive High cycle duty Rehabilitation centres, institutional and rental fleets, distributor programmes
OmniPath 20-inch 800W / 48V 8–20Ah 35–65 km Beach, grass, gravel, soft ground, humid coastal conditions

Zepath and ProPath round out the Custom Wheelchair Electric Bike Attachment Manufacturers, Factory range, while the portable SlimTough power attachment for wheelchairs, the all-terrain NeoPath electric wheelchair power attachment and the off-road OmniPath off-road power attachment carry the highest volumes.

Frame Fit and Mounting Interface

Every unit locks onto the wheelchair front tube through an adjustable bracket and support foot, so the chair itself stays unmodified — no welding, no drilling, no replacement of the whole chair. The clip-on head self-centres on the tube, the adjustable stand keeps the parked wheelchair level, and release is a single motion.

  • Universal tube sizes cover most standard manual and electric wheelchair frames; non-standard tube diameters are handled as a bracket variant.
  • Lock engagement and frame stability are checked before power-up on every unit.
  • Introduced with a four-step user guide: connect and lock, power on and select terrain mode, start smoothly, release the brake and clean after use.

Controls, Braking and Safety Systems

Control hardware is selected to match the rider profile rather than applied uniformly. SlimTough uses a simple knob control that elders can operate without instruction; NeoPath and OmniPath use TFT/LCD instruments with speed, battery and, on OmniPath, fault-code display.

  • Three forward speeds plus reverse and horn across the range.
  • Sine-wave and dual-protocol controllers deliver smooth start-up and low electrical noise.
  • Automatic braking when the unit stops, preventing roll-back on slopes and kerb edges.
  • Disc and hydraulic dual-disc braking rated to 120 mm or 160 mm depending on model.
  • LED high/low beam headlights with colour-tempered output for dusk travel.

Materials, Corrosion Protection and Road Conditions

Main bodies are built from lightweight high-strength aluminium alloy; SlimTough uses an aircraft-grade alloy with wear-resistant oxidation treatment, and NeoPath uses a thickened frame with reinforcement at the stress points and an impact-resistant ABS shell. For coastal users, OmniPath carries an anti-corrosion, anti-rust alloy frame with sealed key parts that resist sand and water ingress. Motors and wiring are sealed against rain and routine washing.

Configuration Options and OEM/ODM Support

We run OEM and ODM programmes from product definition through mass production, covering functional parameters, appearance, interaction logic and market access adaptation. Our technical team joins at the definition stage and works in modular blocks so a variant reaches the market quickly.

  • Battery capacity steps: 6 / 8 / 10Ah at 36V, or 8 / 15 / 20Ah at 48V.
  • Tire specification: solid rubber, pneumatic, or 20×4.0 wide flotation tires for soft ground.
  • Braking: cable-controlled disc, hydraulic disc, or hydraulic dual disc.
  • Controller protocol and instrument cluster, including fault-code display.
  • Housing finish, dashboard colours, branding, packing artwork and manual language.
  • Drive-system integration and control-algorithm adaptation for specific fleet or clinical requirements.
  • Accessories shipped with the drive head: brackets, chargers, batteries, tires, brake consumables.

Quality Control and Acceptance

Full-process quality control runs from incoming alloy and cell inspection through assembly, calibration and final function test under international manufacturing standards. Units are released only after drive, brake, battery and sealing checks. Products are certified for EU and North American market entry, and we work with customers on localized certification adaptation for other regions.

Information We Use to Configure Your Solution

A proposal is built around the working point of the user and the market being served. These inputs let us fix motor, battery, tire, brake and bracket in one pass.

Input Why it drives the configuration
Wheelchair front-tube diameter, shape and ground clearance Fixes bracket variant, stand height and mounting angle
User weight and intended payload Sets motor torque class and frame reinforcement
Terrain mix and typical trip distance Selects tire type, tread, suspension and battery capacity
Target top speed and local road rules Configures controller limit and instrument display
Destination market and required compliance evidence Determines certification file set and label content
Order pattern: single units, fleet or annual programme Defines packaging, spare-parts kit and documentation depth

Installation, Maintenance and Spare Parts

Delivery includes the drive head, battery pack, charger, mounting bracket and a user guide; multilingual technical documentation and spare-parts lists are supplied for channel customers. Routine attention is limited to battery charging practice, brake pad and tire wear, and bracket torque checks. For institutions and rental platforms we provide remote diagnosis and fault guidance, operator training, equipment calibration and rapid spare-parts supply, and our equipment management back end supports status monitoring and fault alerts on managed fleets.

Frequently Asked Questions

Does a Wheelchair Electric Bike Attachment fit every wheelchair?

Our brackets fit most standard manual and powered wheelchair front tubes without modifying the chair. Send the tube diameter and a photo of the frame and we will confirm the bracket variant before the order is released.

How far can the unit travel on one charge?

Rated range runs from 35 km to 65 km depending on model and battery option — for example 40/50/60 km on SlimTough and 35/55/65 km on OmniPath. Real range varies with rider weight, terrain, speed setting and temperature.

Can the Power Trike Wheelchair Attachment be used on sand or gravel?

Yes. OmniPath is built specifically for beach, grass, gravel and soft surfaces, with an anti-corrosion frame, sealed sand- and water-resistant components, wide 20×4.0 tires and a high-torque 800W geared motor.

Who performs installation and training?

Riders install the unit themselves — SlimTough is a tool-free, one-hand fit and all models use the same lock-and-check sequence. For clinical, nursing-home and rental programmes we provide operator training, calibration and on-site maintenance support.

What documentation comes with an export order?

Each shipment includes the user guide, charger and bracket set. Channel orders add multilingual technical documentation, spare-parts lists and troubleshooting material, and we collaborate on localized certification adaptation for the destination market.

Can we order a customized variant under our own brand?

We run OEM/ODM programmes from concept to mass production, covering functional parameters, appearance, interaction logic, battery and tire selection, branding and packaging, backed by our Suzhou factory and 25 years of export manufacturing.

X Facebook
Products News