Off-Road Electric Wheelchair Power Attachment - OmniPath

Suzhou Compaw Intelligent Technology Co., Ltd. manufactures the OmniPath, an off-road electric wheelchair power attachment that converts a standard manual wheelchair into a front-wheel-drive all-terrain mobility machine. We design, produce and export this unit from a 50,000 ㎡ facility in Suzhou, Jiangsu, backed by more than 300 employees and 25 years of manufacturing experience in accessible mobility equipment. Over 70% of our output ships to overseas markets, and OmniPath sits at the top of our power-attachment range, where sand, gravel, grass and salt-air coastal ground are the normal working surface.

The attachment is a self-contained drive head: an 800 W brushless geared motor, a 48 V lithium pack, a sine-wave brushless DC controller and hydraulic dual-disc braking, all carried on an anti-corrosion alloy frame. It connects to standard wheelchair frames without modifying the chair, so one power head can serve several manual wheelchairs across a rental fleet, rehabilitation department or community service point.

OmniPath: Specification and What Each Figure Means

As a Wholesale Off-Road Electric Wheelchair Power Attachment - OmniPath Suppliers, Exporter, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.

As the Off-Road Electric Wheelchair Power Attachment - OmniPath manufacturer, we build the drive head, frame, controller and battery assembly in one production flow. The table below lists the released configuration of this model; where an option is shown, we fix the final value when the order configuration is confirmed.

Terrain and Application Fit

OmniPath is specified where the surface, not the distance, is the limiting factor. The high-torque geared drive, wide inflatable tire and sealed drive housing are aimed at ground that stalls a standard power attachment.

• Beach and wet sand — the primary target surface, with sealed components rated for sand and water exposure.
• Grass and lawn parks — soft turf where narrow tires dig in and lose traction.
• Gravel and unpaved paths — the all-terrain chassis manages many unsealed routes.
• Coastal promenades — anti-corrosion materials for salt-laden, humid air.
• Rental and community schemes — one head, several chairs, with a TFT instrument that speeds up daily checks.

Our Power Attachment Range and Where Each Model Fits

The full attachment family is catalogued under China Power Trike Wheelchair Attachment Manufacturers, covering five power heads that share mounting logic and service approach.

Configuration Options We Build Around

An OmniPath order is not a single fixed SKU. We assemble the drive around the duty cycle the customer describes, and we confirm each variable in writing before production.

• Battery pack at 8 Ah, 15 Ah or 20 Ah, selected against daily distance and acceptable unit weight.
• 6-tube or 12-tube sine-wave controller, chosen for continuous load and climate.
• Braking and tire configuration retained as released, with consumable spares supplied against the same part numbers.
• OEM/ODM adaptation covering functional parameters, appearance design and interaction logic where the volume and market justify it.
• Market-specific speed limits and documentation language agreed at order stage.

Mounting, Interfaces and Commissioning

The attachment is designed for standard manual wheelchair frames and connects without replacing the chair. Commissioning is short and follows the same sequence on every unit.

1. Connect the attachment to the wheelchair and lock it securely at the mounting point.
2. Power on and select the drive mode suited to the terrain.
3. Start smoothly on soft surfaces; the geared motor does not need a running start to break free of sand.
4. Clean the unit after use, particularly after sand or saltwater exposure.

Frame tube dimensions and the existing attachment point on the wheelchair are the two fitment variables we verify first, since bracket adaptation is what determines whether the head locks without play.

Quality Control, Acceptance and Compliance

Our 50,000 ㎡ plant runs full-process quality control against international manufacturing standards, from incoming materials through assembly and final function checks before packing. Every unit is powered, driven and checked for brake response, controller communication and instrument fault reporting as part of the release routine.

Products are certified for the EU and North America markets, and we work with customers on localized certification adaptation for other regions. Compliance documents travel with the shipment, alongside multilingual technical documentation for channel partners.

Information We Use to Configure Your Solution

We prepare a configuration and quotation from the project data below. The more precisely the working conditions are described, the closer the first proposal comes to the final build.

Maintenance, Spare Parts and Serviceability

OmniPath is maintained at component level rather than replaced as a unit. Consumables and spares are grouped in our electric handcycle attachment accessories range, so a damaged tire or a tired battery does not take a chair out of service for weeks.

• Tires and inner tubes are field-replaceable with standard workshop tools.
• Brake discs and hydraulic components are serviceable as separate parts.
• Lithium packs and DC 48 V 2 A chargers are supplied against the original configuration.
• The TFT instrument reports fault codes, and we provide online troubleshooting guidance to support channel service teams.
• Rinse and dry the sealed housing after sand or saltwater use to protect the anti-corrosion finish.

Frequently Asked Questions

Can OmniPath really be ridden on beach sand?

Yes. The model is optimized for beach and soft surfaces, with sandproof and waterproof sealing on the key parts. The 20 × 4.0 inflatable tire spreads load so the drive wheel floats rather than sinks, and the geared motor delivers torque at low speed instead of spinning.

Will the frame corrode from salt air and wet sand?

The frame is built from anti-corrosion, anti-rust high-strength alloy, which is why we specify it for humid coastal environments and sea-front use. Regular rinsing after saltwater exposure keeps the finish and the sealed housings in good condition.

Which wheelchairs does it fit?

It connects to standard manual wheelchair frames without modification or replacement of the chair, and locks securely at the front attachment point. Send us the wheelchair model, frame tube dimensions and the existing mounting point, and we confirm the bracket arrangement before production.

How far can one charge take a user?

Our released figures are 35, 55 and 65 km for the 8 Ah, 15 Ah and 20 Ah lithium packs. Soft sand and continuous slopes sit at the demanding end of that spread, so we size the pack against the daily distance the customer describes.

Can we order OEM branding and a different battery or controller specification?

OEM/ODM development covers functional parameters, appearance design and interaction logic, and we work from modular building blocks so a customer-specific build reaches production quickly. Battery size, controller tube count and market-specific speed limits are agreed during configuration.

What do you need from us to issue a quotation?

Wheelchair type and frame dimensions, user weight, main surface and maximum slope, required daily range, destination market, order quantity, branding or packaging requirements and any spare-parts expectations. With those inputs we confirm the configuration, the compliance route and the delivery scope in one proposal.